How to build a blacktop or asphalt road for miniature models.

superiorscenics — Mon, 05 Sep 2016 15:35:21 +0000

How did you build the road? That is one of the questions asked when people see our displays at shows. Here I am going to explain how to build a blacktop or asphalt driveway or road. I would also recommend that you read through the instuctions, have your materials ready, and practice on a sample board before going to your project.

In order to keep your road at a uniform thickness, you will need to stike it. Therefore use some type of material to form the edges of the roadway, such as thin strips of wood.
Fill the formed in area with your stone material, in this case, Superior Scenics black lava in the ultra fine grade. Strike off the material to grade.
Using a very fine atomized spritz sprayer, completely dampen the material with a water and liquid dish soap mix. Use only a couple drops of dish soap. You do not want bubbles. Do not skip this step. It prepares the material for the application of glue.
Make a 50/50 mixture of Elmer’s white glue and water. Add a couple drops of liquid dish soap to the 50/50 mix. It works well to have this mixture in a glue bottle.
Carefully apply the glue mixture holding the bottle near, but not touching, the stone material. Apply at a very slow flow, or even individual drips at a time.
You will have applied enough glue when it starts to look a little milky. You will see the glue rise a little and then settle, but be careful that it doesn’t start to flow out the sides.
If you have used a little too much glue, and it does run out the sides, or puddles on the surface, you can let it sit for some time to allow the glue to soak in and settle.
I recommend that you add a very light, even dusting of additional stone across the entire surface. You do not want to make piles.
For the next step, you will need wax paper and a roller. A pizza roller works well. Cover the area you are working on with a piece of wax paper. With the roller in hand, lightly roll the top of the wax paper, to get a nice, even roadway. Do not press hard.
Gently remove the wax paper. If the wax paper sticks to the material, use a small putty knife to free the material from the wax paper. The purpose of step 8 is so prevent the wax paper from sticking to the product. If needed, repeat step 8 through 10.
Remove your forms before the glue dries. I use an x-acto knife to accomplish this.

Additional Tips:

If you want a more aged look, you can apply another light dusting of stone material and roll it in to the roadbed again. Do this while the material is slightly damp and still tacky.

If you want it to look new, wait till the product is completely dry. Dampen lightly with water and soap mix. Then go back over it with the glue & water mix. Painting it on using a small paint brush works well. This will darken the color to make it look like “new” asphalt.

Check out our facebook page for more ideas.

Click to go back to Black Lava

The post How to build a blacktop or asphalt road for miniature models. appeared first on Superior Scenics | Miniature Lakes, Trees, & Stone for models.

We now have winter/Christmas products

superiorscenics — Fri, 15 Jan 2016 18:50:48 +0000

We have our flocked (snow covered) winter trees, winter lakes and lighting!

Look for the winter trees and lake in our new winter display that we take to shows. Evergreen trees are made individually by hand and then flocked with “snow.” For instance, they work well in any miniature model including model train sets and Christmas villages. Similarly, add some lights to make your own miniature Christmas tree!

Any of our lakes can also be used in a winter scene. Some snow is added and the base is painted white. Furthermore, no two lakes will be exactly the same. To make it fit right in, just add a bit of landscaping materials around the lake .

We also have a summer display with lighting. The LED lighting we carry is from Evans Designs. These lights are designed specifically for modelers. Some of the items available are Mars lights, FRED’s, synchronized flashing lights for towers, pendant lights, gooseneck lamps. Add interior lights for structures, a campfire at a hobo encampment, or flashing colored lights to emergency vehicles. In addition, there are welding lighting kits, solid or flashing white or colored lights. In other words, the choices are limitless to create your scene.

These are just a few of the items Superior Scenics, LLC offers. Not all of the items listed here can be found on this website. However, any of them can be ordered by phone. Just give us a call at 1-608-751-5554 and we will be happy to help.

Please share us with your friends. Help us grow!

Click on the link below to view the product.

Winter Evergreen Trees

You can also view our Facebook page for ideas on how to use our products.

The post We now have winter/Christmas products appeared first on Superior Scenics | Miniature Lakes, Trees, & Stone for models.